| Message |
Details |
Looks like rating details to me.  | Posted: Topic Replies: 8, Topic Views: 142 |
 |
I personally still give all of them Negative Rating. Although yesterday was a tad excessive. I almost ran out of Negative responses I could give.
Christopher Lloyd from the movie Nobody: "Just a bit excessive". | Posted: Topic Replies: 5, Topic Views: 602 |
|
Escape From L.A.: Film Editor ... EDWARD A. WARSCHILKA
Rambo III: Not Listed Invalid | Posted: Topic Replies: 9, Topic Views: 767 |
|
Quoting GSyren:
Quote:
Yes, it's sad to see that the programs get no updates and that the website isn't functioning as well as one would want. But still the desktop program and the iOS app on iPad work fine for keeping track of my discs. I don't buy very many new titles, and I may have to enter them myself rather than download them, but I can live with that. As long as these programs work, I'm sticking with DVD Profiler, because I haven't found anything that is nearly as good.
"Ditto" | Posted: Topic Replies: 11, Topic Views: 1383 |
|
The House With a Clock in Its Walls: Jean-François (Jafaz) Ferland ... VFX Supervisor
Mission: Impossible: Dead Reckoning: Part One: JF FERLAND ... Visual Effects Executive Supervisor | Posted: Topic Replies: 19, Topic Views: 2729 |
|
| The Source: JOHNNY VENOKUR | Posted: Topic Replies: 5, Topic Views: 1081 |
|
| I don't know where, but Ken said if the 1st number is larger, that wins, in this case [Gérard Bonn=6/48]. The only time the 2nd number wins is if they 1st numbers are tie. | Posted: Topic Replies: 3, Topic Views: 850 |
|
Extremely disappointing, but I still give them a negative.   | Posted: Topic Replies: 3, Topic Views: 937 |
|
Quoting greyghost:
Quote:
Hold the Ctrl key and select Refresh Online Profile List... under the Online... tab.
This just downloads the complete online profile list, you still need to Refresh Updated Profiles as usual.
This is the way to accomplish the updates and it works every time. Be patient when you do the first step. | Posted: Topic Replies: 47, Topic Views: 8777 |
|
Quoting GSyren:
Quote:
Quoting mreeder50:
Quote:
For example "The Princess Bride" Blu-ray and DVD using AnyDVD gives you one number; Add by DVD Disc ID gives another and DiscIdCheck gives another.
Odd, when I tested, Add by Disc ID and DiscIdCheck gave the same result. You didn't have AnyDVD running, by any chance?
I added a check for that in version 1.1, but it's not in 1.0, if that's the version you used.
Welcome to the Disc Id roulette! 
It reminds me a bit of the old joke - The best thing about standards is that there are so many to chose from!
I have tried it with and without AnyDVD running. I do use run as administrator, for all programs (plugins) or without for all involved. I do use HTTPJolie. I am using 1.1.
There is just no combination that gets the same DVD Disc ID in the Blu-ray parent, the DVD Disc and the UPC Disc ID together on the same page. Unless there is another scenario I haven't tried. | Posted: Topic Replies: 14, Topic Views: 4428 |
|
My brain hurts trying to figure this out. For example "The Princess Bride" Blu-ray and DVD using AnyDVD gives you one number; Add by DVD Disc ID gives another and DiscIdCheck gives another. If you try to update the Blu-ray parent to include the DVD child you cannot get the Disc ID from DiscIdCheck to match. I think I will keep using AnyDVD as long as it lasts and worry about it when it quits working.
We can all thank Microsoft for this ridiculous thing. A Disc ID should be whatever it is all the time, not one thing when using one piece of software or something else when using another.
And lastly, I wish someone could give a definitive answer as to what is correct and how to get all the pieces to fit together for parent and children.    | Posted: Topic Replies: 14, Topic Views: 4428 |
|
Quoting andersmo:
Quote:
Quoting mreeder50:
Quote:
If you have a Slysoft (Redfox) Key, I have 8.7.0.0 and can email it to whoever wants it.
If you have a valid Slysoft or Redfox key, and only want to download the software, you can do so at VideoHelp:
https://www.videohelp.com/software/AnyDVD/old-versions
Note that if you have a Slysoft key, you should download one of the 7-versions, if you have a Redfox key, you should download one of the 8-versions.
If you don't have a key, and only want AnyDVD for correcting the DVD ID when reading it in DVD Profiler, you can take GreyHulk up on his generous offer earlier in this thread:
http://www.invelos.com/Forums.aspx?task=viewtopic&topicID=926221&PageNum=14&messageID=3447165#M3447165
Thanks, I took advantage of the latest myself. | Posted: Topic Replies: 228, Topic Views: 30915 |
|
| If it were me, I would include him and put (rocks and mesas) in parens after the credit or you could use rocks and mesas as a divider. | Posted: Topic Replies: 22, Topic Views: 9578 |
|
Quoting andersmo:
Quote:
Quoting zappman:
Quote:
AnyDVD HD 7.6.9.2 by RedFox.bz
7.6.9.2 is a pretty old version of AnyDVD. Even though it may have been released by Redfox, which was a newly formed company at the time, it still bears the legacy of Slysoft, and must be activated using a Slysoft key. I don't remember all the details, but Redfox may have honored the Slysoft registrations for a short while to allow current users some time to purchase new licenses.
Having said that, I have now installed AnyDVD 7.6.9.2 and DVD Profiler on a spare computer, and that combination works very well indeed - I get the correct DVD IDs every time.
So it's a mystery to me why it doesn't work for you. Perhaps you have some other software that conflicts with AnyDVD?
A word of caution, though. If you wish to use the plugin "Add by DVD Disc ID", you must disable AnyDVD, or else it will read incorrect IDs !!! That plugin is not compatible with AnyDVD.
If you have a Slysoft (Redfox) Key, I have 8.7.0.0 and can email it to whoever wants it. | Posted: Topic Replies: 228, Topic Views: 30915 |
|
| I have read that AnyDVD will read the IDs correctly until it doesn't work anymore. If that's not the case is there a definitive answer as to what will...read disc IDs that is? | Posted: Topic Replies: 228, Topic Views: 30915 |
|
Right click on the profile you want to copy from and click copy;
Click on the profile you want, then right click and choose the info you want to paste and click OK. | Posted: Topic Replies: 1, Topic Views: 1007 |
|
| Thanks for the info. | Posted: Topic Replies: 113, Topic Views: 29399 |
|
| Eventually, all my contributions get approved or declined. | Posted: Topic Replies: 28, Topic Views: 6386 |
|
| I am so sorry about this, but every time there is an update, I can't figure out how to download it. | Posted: Topic Replies: 113, Topic Views: 29399 |
|
| Thank you so much, this is exactly what I do. | Posted: Topic Replies: 30, Topic Views: 29386 |
|
Quoting Don Diego:
Quote:
Ever since the server update, I haven't been able to refresh updates. Every time I hit the Refresh Updated Profiles button, all I get is the "All DVDs are up to date" response. That can't be correct. I've checked my settings, performed a database repair, no change. Any help will be appreciated.
Follow the directions GSyren (Gunnar) has given above. | Posted: Topic Replies: 11, Topic Views: 4680 |
|
| I thought the same thing, but lately I have been getting updates after approval. Most of the time however, I get the "All DVD profiles are up to date." | Posted: Topic Replies: 30, Topic Views: 7965 |
|
My vote is for the Paramount Pictures...  | Posted: Topic Replies: 5, Topic Views: 2763 |
|
| Thank you. | Posted: Topic Replies: 55, Topic Views: 9870 |
|
| No questions. I love the tools you have created. I use several of them. | Posted: Topic Replies: 55, Topic Views: 9870 |